All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of publication.
We reserve the right to make design changes at any time without prior notification
21
2.0. Assembly
2.5. Hydraulically adjusting the blow-
out nozzle using a control valve
Connect the hydraulic hose
(G)
from the control valve to the
hydraulic cylinder's threaded
connection
(H)
.
Connect the hydraulic hose
(J)
90 from the control valve to the
hydraulic cylinder's threaded
connection
(K)
.
Insert the plug
(L)
in the
control valve and secure it
using the screw.
Lay the cable with switching box
(M)
for the operator area in the
tractor.
Connect the 3-pin plug
(N)
to
the corresponding socket on the
tractor.
If your tractor is not equipped
with such a socket, please
consult your dealer or have one
installed by a specialist
technician.
The parts
(T)
needed to install a
suitable socket are included in
the equipment supplied.
Screw the hexagon screw
(P)
into
the thread on the grille
(R)
.
Turn the hexagon nut
(S)
downwards to secure the screw in
place.
It must be possible to easily
move the hydraulic hoses after
they have been secured using the
two fastening clamps.
