All information, illustrations and specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
13
2.0. Connecting to the Tractor
2.1. General
CAUTION :
The machine must only be
connected when the engine is
shut off and the PTO shaft
drive is switched off.
With the three-point linkage
it is essential that the
assembly categories of the
tractor and machine match
each other.
When the machine is in
transport position, always
ensure that the side locking
of the tractor three-point
linkage is sufficiently
secure.
Observe the max. permissible
axle load of the tractor.
There a risk of injury
through crushing or shearing
in the area of the machine
parts which can be raised.
The warning and information
signs on the machine contain
important information to
ensure safe operation.
Observe these instructions
for your own safety!
When driving on roads, the
machine must be raised and
locked to prevent it sinking
again.
Before leaving the tractor,
lower the mounted equipment
to the ground. Take out the
ignition key if necessary.
