Wiedenmann 329.003 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 47

Wiedenmann 329.003 Скачать руководство пользователя страница 28

All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of

publication. We reserve the right to make design changes at any time without prior notification

28

7.0. Operation

7.1. Driving characteristics

CAUTION :

The driving and operational
characteristics of the
tractor may be influenced
by the attachment of the
collector.



Always adapt your driving
style to match the terrain
and ground conditions.



Special care should be taken
when working and turning on a
slope.

7.2. Transport

Transport the collector on
roads only when it is empty as,
with some tractor types, the
permissible axle load for road
transportation may be exceeded.

7.3. Observing switching on sequence



Switch on vacuum in operating
position.



Switch on mowing equipment.

Operate at maximum tractor
engine speed and at a suitable
driving speed.

«
...
26
27
28
29
30
...
»

Содержание 329.003
















































Отзывы:

Нет отзывов