Wiedenmann 329.003 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 47

Wiedenmann 329.003 Скачать руководство пользователя страница 25

All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of

publication. We reserve the right to make design changes at any time without prior notification

25

5.0. Removal from Tractor

5.1. Securing the running gear

Swivel both running wheels (A)
to the back.

Unscrew both spring
cotters (C).

Push the connecting pin (B)
downwards into the hole in the
wheel fork and secure it in
place with both spring
cotters (C).

5.2. Removing the material collector

CAUTION:

When disconnecting,
place supports on firm,
flat ground.
- DANGER OF TOPPLING!



Lower the support leg,
connect it and secure it in
place.



Drain the suction unit.



Disconnect the hydraulic
line and remove the cardan
shaft.



Declamp the top connecting
rod and remove it from the
collector.



Unscrew the spanner nut on
the bottom connecting rod
and remove the rod from the
locating pin on the
collector.



Unscrew the extractor from
the lawn mower.

CAUTION :

Ensure that all
connections to the
collector have been
removed.
OVERTURNING HAZARD !

«
...
23
24
25
26
27
...
»

Содержание 329.003
















































Отзывы:

Нет отзывов