6
Setting
Setting
Setting
Setting up
up
up
up a
a
a
a DMX
DMX
DMX
DMX Serial
Serial
Serial
Serial Data
Data
Data
Data Link:
Link:
Link:
Link:
Master/Slave
Master/Slave
Master/Slave
Master/Slave Fixture
Fixture
Fixture
Fixture Linking:
Linking:
Linking:
Linking:
1.
Connect the (male) 3 pin connector side of the DMX cable to the output(female) 3 pin
connector of the first fixture.
Connect the end of the cable coming from the first fixture which will have a (female) 3 pin
connector to the input connector of the next fixture consisting of a (male) 3 pin connector. Then,
proceed to connect from the output as stated above to the input of the following fixture and so on
Operating
Operating
Operating
Operating Modes:
Modes:
Modes:
Modes:
You can use the unit in either a stand alone mode or a master/slave configuration, there are 4
modes to choose from:
• Program Mode - Choose a static color, color show, color fade show, or color cycle. The speed of
the show is adjustable. You can also have the unit strobe in this mode.
• Master/Slave Mode- Using the Master unit, choose your desired mode or program and connect
the
“
Slave
”
unit or units, All slaves will now follow the”Master” unit. But only one master.
• DMX control mode - This function will allow you to control each
individual fixtures traits with a standard DMX 512 controller
Product
Product
Product
Product overview:
overview:
overview:
overview:
(Diagram I)
