WiebeTech LLC
R T X - I R U s e r ’ s M a n u a l
- 30 -
f.
You should wind up back at the main UDV screen. The RAID will begin initializing, and progress
will be displayed in the R% column. Depending on the RAID type and size, the initialization could
take several hours. The R% number will disappear when the initialization has finished. Note: If
you selected RAID 0, you may not see a progress meter because it initializes almost instantaneously.
g.
Select the check box next to the UDV you just created and then click
Attach
. If you created more than
one volume, you’ll need to repeat this step for each one.
h.
Use the default settings on the next screen. You’ll need to confirm your selections.
* With the RTX400-IR, the number of drives contained in the RAID group can be as high as eight using
the four eSATA expansion ports on the rear of the unit. These ports allow you to connect another 4-bay
JBOD eSATA enclosure (e.g. RTX400-SJ), or multiple 1-bay eSATA drive enclosures and add those
additional drives to the RTX400-IR’s RAID. Note: These additional drives must be added at the time the
RAID is first created.
