WiebeTech LLC
R T 5 E U s e r M a n u a l
- 4 -
Technical Specifications
Product name/code:
RT5E
Raid Levels Supported:
0, 1(0+1), 3, 5, (+Spare)
Host Interfaces / Speeds:
eSATA – 1.5GHz (up to 150MB/sec)
Drive Types Supported:
3.5” IDE/PATA hard drives up to 750GB
Single Capacity Limitations:
None
Hot-Swappable Trays:
Yes (except when using RAID 0)
Automatic Data Reconstruction:
Yes
Monitoring Software:
RAIDGuide GUI software (Windows only)
System Detection:
•
Hard Disk failure sensors
•
Temperature alert
•
Cooling fan failure sensor
Controller Display:
LCD screen with yellow backlight/control panel
Operating System
Requirements:
•
Windows 2K, XP, Server 2003, Vista
•
Mac OS 10.2.6 or later
•
Linux distributions that support eSATA
Operating Temperature:
50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity:
5% to 95%, noncondensing
Power Switch:
2 position: On / Off
Power Supply:
100-240V, 200 Watts
Cooling Fan:
8cm Ball Bearing Fan
Certification:
CE/FCC
External Material:
Aluminum case
Shipping Weights:
17lbs, sans drives
22lbs, with drives
Dimensions:
(162mm x 270mm x 228 mm)
Warranty:
1-year limited warranty. See warranty statement for details and limitations.
WiebeTech offers free phone support for 90 days after purchase. After 90
days, email support is available at
.
RT5E is a trademark of WiebeTech LLC. Other marks are the property of their respective owners.
© 2007 WiebeTech LLC. All rights reserved.
FCC Compliance Statement:
“This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
Ensure that your unit is plugged into a grounded electrical outlet.
2)
Use a data cable with RFI reducing ferrites on each end.
3)
Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact
for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact
. We
appreciate being able to serve you!