WiDRIVE DX-325 User’s Guide
Copyright © 201
2
EDSLAB Tech. Inc.
3
4
7 Regulatory Information
FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CAUTION:
1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm
must be maintained between the antenna of this device and all persons.
2. This Transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
needed.
Consult the dealer or an experienced radio/TV technician for help.
FCC Warning:
Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user authority to operate the equipment.
CE Compliance
This product is CE marked in accordance with the requirements of the applicable EU Directives.
Responsible for CE marking is EDSLab Technologies Inc. A copy of the official Declaration of Conformity
can be obtained from following website: http://www.edslab.com
Working Environment
The Electromagnetic Compliance (EMC) of this product has been verified typically for this product
category for a so called Residential, Commercial & Light Industry Environment. Any other working
environment has not been verified by EDSLab Technologies Inc. and the use of this product in these
working environments is maybe restricted or cannot be recommended. Possible consequences of the
use of this product in non verified working environments can be: Disturbances of other products or of
this product in the nearby surrounding area with temporarily malfunction or data loss/corruption as
result. Example of non verified working environments and related advices:
Industrial environment (e .g . environments where a mains voltage of 380V three-phase is being used mainly):
Danger of disturbances of this product due to possible strong electromagnetic fields especially near to