Kunststoffschweißtechnik
Description of product
Chapter 1
01.02.2012
Working Instructions WIDOS 2500 / OD 250
Page 7 of 45
1.4. Marking of the product
The product is marked by a type label.
It contains the type, the serial number and the year of construction of the machine.
1.4.1. Technical data
1.4.1.1. WIDOS
2500 / OD 250
General data
Dimensions of pipes:
outside-Ø = 50 - 250 mm (optional, outside-Ø = 20 - 40 mm)
Material:
PP, PE , PVDF
Fuse protection:
16 A
Wire cross section:
1.5 mm²
Packing case:
960 x 690 x 710 mm
Emissions
- Noise exceeding 80 dB (A) may occur; during planing it is
obligatory to wear ear protection!
- When using the named pipe materials and when welding
below 260°C / 500°F no toxicant damp arises
Ambient conditions in the
welding area
- take care for cleanness (no dust at the welding area)
- If secured by an appropriate measurement that allowed
conditions for welding are indicated, it is possible to work in
any outside temperature condition as far as the welder is not
constrained in its manual skill.
- avoid humidity, if necessary use a welding tent
- avoid strong sun rays influence
- protect from wind, shut the pipe ends
1.4.1.2. Heating element
Power:
1500 Watt
1500 Watt
Current:
6.5 A (± 10 %)
13,6 A (± 10 %)
Voltage:
230 V (± 10 %)
110 V (± 10 %)
Frequency:
50 Hz
60 Hz
Surface:
nonstick coated
Attached elements:
-
electronic temperature control
-
control lamp
-
connection cable with plug
1.4.1.3. Planer
Power:
1050 Watt
1050 Watt
Current:
4.5 A (± 10 %)
9,5 A (± 10 %)
Voltage:
230 V (± 10 %)
110 V (± 10 %)
Frequency:
50 Hz
60 Hz
Attached elements:
- connecting cable with plug
