Kunststoffschweißtechnik
Operating and indicating elements
Chapter 4
01.02.2012
Working Instructions WIDOS 2500 / OD 250
Page 15 of 45
4.2. Elements at the planer and heating element
No.
Denomination
Function
Planer
8
Switch on/off
- For switching on / off the planer
9
Button
- As soon as the planer is switched on and the
button is pressed, the planer turns round
Heating element
10 Switch on/off with lamp
- As soon as the heating element is switched on, it is
heated up.
- The red lamp lightens when the heating element is
connected to the mains.
11 Adjusting screw
- Adjusting the temperature of the heating element.
12 Control lamp, green
There are three different states:
-
Off
: signalizes that the heating element is not
heated up at the moment or that it cools down.
-
Blinking
: the heating element temperature is
maintained by a certain pulse-position ratio.
-
On
: signalizes that the heating element is heated
up at the moment. The desired temperature has
not been reached yet.
8
9
10
11
12
