Wido WD010221100, Руководство пользователя

Страница: 7 / 16

1100W IMPACT DRILL ENG
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving
parts.
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application.
The correct
power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off.
Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.
Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are dangerous
in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged, have
the power tool repaired before use.
Many accidents are caused by poorly maintained power
tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power
tool for operations different from those intended could result in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts.
This will ensure that the safety of the power tool is maintained.
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR POWER TOOL
1) Wear ear protectors with power tool. Exposure to noise can cause hearing loss.
2) Use auxiliary handles supplied with the power tool. Loss of control can cause personal injury.
3) Wear safety goggles or eye protection when using this power tool. Use a dust mask or
respirator for applications which generate dust.
4) Hold power tool by insulated gripping surfaces when performing an operation where the cutting
accessory may contact hidden wiring or its own cord. Cutting accessory contacting a ‘live’ wire will
make exposed metal parts of the power tool ‘live’ and could give the operator an electric shock.
5) Always check walls and ceilings to avoid hidden power cables and pipes. Contact with electric
lines can lead to fire and electric shock. Damaging a gas line can lead to explosion. Penetrating a
water line causes property damage. A metal detector can be obtained from any good DIY store for
this purpose.
6) Use clamps or other practical way to secure and support the workpiece to a stable platform, if
possible. Holding the work by hand or against your body is unstable and may lead to loss of control.
7