R
G
B
W
FLASH
STROBE
FADE
SMOOTH
LED CONTROLLER
IR RECEIVER
LED LIGHT STRIP
TRANSFORMER
OFF
ON
R
G
B
W
FLASH
STROBE
FADE
SMOOTH
Pull out ba�ery tray to
insert/replace ba�eries
in the remote
REMOTE
Align the arrows on the connectors
Remove contents from the packaging and ensure all parts are included. Check for any signs of
damage to components.
Clean the surface onto which you wish to mount the product. The surface must be clean, free from
dust, grease and dry. Otherwise the stickiness of the doublesided adhesive tape might be affected.
Install the LED light strip in desired location with double sided tape on the back of the strip. Ensure the
connector is positioned on the side where the mains power socket is located.
Attach the LED controller to the LED strip, ensuring the arrows on both connectors align.
Connect the transformer to LED controller and plug in to mains power supply. Ensure the transformer
is always accessible.
Remove the insulating strip from the battery compartment of the remote.
1.
2.
3.
4.
5.
6.
LIGHT SET INSTALLATION
Switch on the light stip using ON - OFF buttons on the remote. The off button on the remote control is
only suitable for switching the light set off temporarily. Always unplug the transformer from mains
power supply to switch it off permanently.
Aim the remote control directly at the infrared receiver for best reception. Ensure that there are no
obstacles between the sender and the receiver.
You can control the light effects using the remote control function buttons. The following settings are
available:
1.
2.
3.
OPERATING THE LIGHT STRIP
Switch the light set ON and OFF
Increase and decrease the light intensity
Set sta�c RED light
Set sta�c GREEN light
Sets 7 colour flash mode
Sets strobing light effect
Sets 7 colour flowing fade effect
Sets RGB base colour flash
Select one of pre-mixed colours
Set sta�c BLUE light
Set sta�c WHITE light
OFF
ON
LIGHT CHAIN
LED DRIVER
TRANSFORMER
TECHNICAL SPECIFICATION
AD/DC Adaptor (
Model: LX1202)
Input100–240V
~
50/60Hz | Output 12V 2A
LED Driver
Input 12V
Remote Control
3V Lithium battery type CR2025