Wideye Sabre I Remote terminal, Руководство по установке

Страница: 9 / 24

SABRE
TM
Shield Installation Guide
8
7. Install the base plate back to the SABRE TM Shield.
8. Install four screws to secure the base plate to the SABRE
TM
Shield.
9. Insert the power plug into the DC power input socket on the SABRE TM I
Remote terminal.
10. Insert the connector end of the Phone cable to the SABRE TM I Remote
terminal Analog Phone (RJ11) port.
11. Insert the connector end of the Ethernet cable to the SABRE
TM
I Remote
terminal Ethernet (RJ45) port.
DC power input socket
Analog phone (RJ11) port
Ethernet (RJ45) port
Screws Screws