Wideye Sabre I Remote terminal, Руководство по установке

Страница: 21 / 24

SABRE
TM
Shield Installation Guide
20
5. Secure the mounting after obtaining maximum signal strength.
Note:
For any service to commence, minimum 45dBHz signal strength is required.
6. Click
Register Network
to register to the BGAN network.
Once network registration is completed, the
Registered to network. You
are now able to make phone call or send SMS and data transfer message
is displayed.
Note:
The GPS co-ordinates will not be displayed until you click Register Network
to register to Inmarsat’s BGAN network. The GPS display prohibited message
will be displayed if the GPS coordinates are prohibited by the BGAN network.
Note:
The SABRE
TM
I Remote is not intended to be connected to any North American
(U.S., Canada) TNV circuit or PSTN (Public Switch Telephone Network).