Wideye iSavi-E, Быстрый старт

Страница: 2 / 12

Regulatory Information
Quick Reference
Getting Started
LED Visual Pointing Mode
Audio Assisted Pointing Mode
Accessing Data
Powering Down and Detaching the Battery
03
04
05
08
10
11
12
While the information in this Quick Start Guide has been prepared in good faith, no representation or warranty, express or implied, is made or given as to the adequacy, accuracy,
reliability or completeness of such information. Addvalue Innovation Pte Ltd nor their respective officers, employees or agents shall have any responsibility or liability to any
person resulting from the use of the information in this Quick Start Guide. Copyright © 2016 Addvalue Innovation Pte Ltd. All rights reserved. Addvalue, the Addvalue Enabled
logo, Wideye, the Wideye logo, iSavi and iSavi logo are either trademarks or registered trademarks of Addvalue Technologies Ltd and/or its affiliates in Singapore and/or other
countries. Inmarsat and the Inmarsat logo are trademarks of The International Mobile Satellite Organisation and are licensed exclusively to Inmarsat. IsatHub and the IsatHub
logo are trademarks of Inmarsat. Inmarsat, the Inmarsat logo, IsatHub and the IsatHub logo are used by Addvalue Innovation Pte Ltd under licence from Inmarsat.
Votre récepteur/terminal “iSavi”™ peut générer une grande
quantité de chaleur selon les activités du système, telles que la
transmission continue pour une longue période, et la surface
inférieure sera chaud.
Veuillez noter qu’on peut diminuer le risque d’une blessure causée
par la chaleur en vous conformant aux directives suivantes:
1. Manipuler avec précaution lorsqu'on touche la surface inférieure
du récepteur/terminal, en particulier au moment de l’utilisation
ou juste après avoir éteint le récepteur/terminal.
2. Attendre jusqu'à le récepteur/terminal se soit refroidi après
l’avoir éteint, avant l'entreposage dans un espace non ventilé.
3. Ne laissez pas les enfants sans surveillance à portée du
récepteur/terminal.
Caution
Hot surface
Your iSavi™ terminal can generate a significant amount of heat
depending on the system activities such as continuous transmission
over a period of time and the underside surface will be hot.
Note: Reduce the risk of heat related injury by adhering to the
following:
1. Handle with caution when touching the underside surface of the
terminal, especially when in use or just after powering down.
2. Wait for the terminal to cool after powering down before stowing
the device in an unventilated manner.
3. Do not leave children unattended within reach of the terminal.
Caution
Hot surface
Part number:74B00139001
Page