Wide CL24s, Руководство пользователя, Страница: 26 / 72

23
SETUP
LANGUAGE Changes the OSD language. (9 language)
TRANSPARENCY Adjusts the OSD back ground from white opaque to half
translucent.
OSD POSITION Changes the OSD position. (9 positions )
OSD TIMEOUT Adjusts time until the OSD Menu will disappear after adjusting the
menu. (5, 10, 20, 30, 60, 90, 120, 180, 240 seconds)
RESET
SETTINGS Changes the all OSD value to factory outgoing status.
AUTO INPUT
SELECT Disable of enable auto source select. (ON: Searches through all
possible input source until an active video source is found. OFF:
Video input is manually selected.)
PIP
LAYOUT Changes the layout. (OFF, PIP, PBP1, PBP2)
INPUT Changes the secondary source.
SIZE Changes the PIP size (Small, Large)
POSITION Changes the PIP position.
SWAP Swaps the position of the Primary and Secondary images.
S-VIDEO / C-VIDEO input source
Menus Sub-menus Function Descriptions
ADJUST
BRIGHTNESS Increase or decrease the brightness (Range : 0~100)
CONTRAST Increase or decrease the contrast (Range : 0~100)
SATURATION Changes the tone of color (Range : 0~100)
COLOR Changes the richness of color (Range : Green 0~50, Red 0~50)
COLOR SETTING
SELECT Changes the image setting. (MODE A,B)
MODE Changes the color temperature mode. (C1, C2, C3, USER)
RED Red balance. (Only works with USER mode) (Range : 0~255)
GREEN Green balance. (Only works with USER mode) (Range : 0~255)
BLUE Blue balance. (Only works with USER mode) (Range : 0~255)
IMAGE
SCALING MODE Change the image size (FILL ASPECT, 1:1, FILL H, FILL V, FILL
ALL)
H POSITION Adjust the horizontal position of the displayed source image.
(Range : 0~100)
V POSITION Adjust the vertical position of the displayed source image. (Range
: 0~100)
GAMMA Adjust GAMMA value (BYPASS, 1.8, 2.0, 2.2, 2.4, 2.6, DICOM
Preset, V0, V1, V2)