Wide CL24s, Руководство пользователя, Страница: 25 / 72

CL24s USER’S MANUAL
SETUP
LANGUAGE Changes the OSD language. (9 language)
TRANSPARENCY Adjusts the OSD back ground from white opaque to translucent.
OSD POSITION Changes the OSD position. (9 positions )
OSD TIMEOUT Adjusts the length of time the OSD Menu is present on the screen.
(5, 10, 20, 30, 60, 90, 120, 180, 240 seconds)
RESET SETTINGS Changes all the OSD values make to factory default.
AUTO INPUT
SELECT
Disables or enable auto source select. (ON: Searches through all
possible input source until an active video source is found. OFF:
Video input is manually selected.)
PIP LAYOUT Changes the layout. (OFF, PIP, PBP1, PBP2)
INPUT Changes the secondary source.
SIZE Changes the PIP size (Small, Large)
POSITION Changes the PIP position.
SWAP Swaps the position of the Primary and Secondary images.
DVI input source
Menus Sub-menus Function Descriptions
ADJUST BRIGHTNESS Increases or decreases the brightness. (Range : 0~100)
COLOR SETTING SELECT Changes the image setting. (MODE A,B)
MODE Changes the color temperature mode. (C1, C2, C3, USER)
RED Red balance. (Only works with USER mode) (Range : 0~255)
GREEN Green balance. (Only works with USER mode) (Range : 0~255)
BLUE Blue balance. (Only works with USER mode) (Range : 0~255)
IMAGE SCALING MODE Changes the image size. (FILL ASPECT, 1:1, FILL H, FILL V, FILL
ALL)
GAMMA Adjusts GAMMA value. (BYPASS, 1.8, 2.0, 2.2, 2.4, 2.6, DICOM
Preset, V0, V1, V2)
SHARPNESS Sets the sharpness of image. (Softest, Soft, Normal, Sharp,
Sharpest)
OVER SCAN Adjusts the displayed size. (0~8)
ZOOM / PAN Enlarges the image, move image left and right.
FREEZE Keeps the image still.