Wickes 223735, Руководство пользователя

Страница: 14 / 20

14
1. If your power tool becomes too hot, especially when used at low speed, set the speed to maximum and run it with no
load for 2-3 minutes to cool the motor. Avoid prolonged usage at very low speeds. Always keep the blade sharp.
2. Always ensure the work-piece is firmly held or clamped to prevent movement.
3. Any movement of the material may affect the quality of the cutting or sanding finish.
4. Start your tool before working and turn it off only after you stop working.
5. Do not start sanding without having the sandpaper fitted.
6. Do not allow the sandpaper to wear away , it will damage the sanding pad. The guarantee does not cover sanding pad
wear and tear.
7. Use coarse grit paper to sand rough surfaces, medium grit for smooth surfaces and fine grit for finishing surfaces. If
necessary, first make a test run on scrap material.
8. Excessive force will reduce the working efficiency and cause motor overload. Replacing the accessory regularly will
maintain optimum working efficiency.
WORKING HINTS FOR YOUR TOOL
Refer to Fig. H for the applicable blade (relate to the
fitting hole pattern) for your machine.
NOTE:
Please use only accessories designed for
your machine. Do not attempt to use incompatible
accessories.
4. SELECTING A BLADE (SEE FIG. H)
Fig. H
The LED light allows you to keep a clear view under less
illuminated circumstances. To turn on the light simply
press the on/off switch. When you release the on/off
switch, the light will be off.
3. LED LIGHT (SEE FIG. G)
Fig. G