Wickes 223735, Руководство пользователя

Страница: 11 / 20

11
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the instruction book carefully.
Intended Use
The power tool is intended for sawing and separating wooden materials, plastic, plaster, non-ferrous metals and
fasteners (e.g. nails and clamps) as well as for working on soft wall tiles and for dry grinding of small surfaces. It is
especially suitable for working close to edges and for flush cutting.
ASSEMBLY
WARNING: Before mounting or replacing
application tools or accessories, remove the
battery pack. This preventative safety measure
eliminates danger from accidentally starting the
power tool.
WARNING: For all work or when changing
accessories, always wear protective gloves.
Avoid danger of injury from the sharp edges of
the accessories. Accessories can become very hot
while working, presenting danger of burns!
WARNING: To reduce the risk of injury, do not
let the sharp side of the accessory face back
toward the user’s hand.
The tool free system makes you change the accessories
without using an allen key.
- Mounting the end cut blade
1) Flip the tool-less accessory clamping lever forward to
the open position.
2) Rotate the lever counterclockwise to loosen the
flange.
3) Insert the blade onto the accessory Interface, then
press down the flange with finger to keep blade
temporarily secure.
4) Rotate the lever clockwise until accessory is tightened
securely.
5) Flip lever back down.
6) Return lever to seated position.
- Mounting the rigid scraping blade
Follow the steps of mouting the end cut blade.
1. MOUNTING THE ACCESSORIES (SEE FIG. A1-A3)
Fig. A1
Fig. A2
Fig. A3
1
2
3
5
4