First remove seat assembly and lift accessory box out from next to rear
wheel. Set aside. Cut corners on long side of box and fold down to
create a work surface. remove all zip ties and packing material.
After you have installed wheel, stand over bike and Adjust handle
bar angle to your personal comfort level. Fasten the 4 handlebar
clamp bolts in an X pattern so they are snug plus 1/4 turn . MAKE
SURE HANDLEBARS ARE SECURE. DO NOT OVERTIGHTEN!
Stem A
A
B
Center bolt (C)
Attach Handle Bars
When moving bars be careful not to pull right brake lever closed until the front
wheel has been installed.
Using the supplied 4mm allen
wrench, loosen the 2 stem pinch bolts (A) and rotate the
stem 180 degrees so the 4 handlebar clamp bolts are facing
forward.
You may also need to very slightly loosen the center bolt of the stem (C) to
turn the neck. Remove the dust cap to access the bolt.
Please be sure to
retighten center bolt (C)
FIRST
after rotating the stem forward.
Tighten snug plus an extra half turn. Replace dust cap.
I
Tighten the pinch bolts
(A)
snug plus a 1/4 turn
to lock
the stem
in place.
Next, remove the 4 allen bolts ( B ) and gently remove front of handlebar clamp.
Center handlebars into rear clamp and reinstall front clamp using 4 bolts
removed from prior step.
Tighten just enough to hold bars in place.
Continue t
o installation
of front wheel.
