Setting your Display
To power on the bike, make sure the battery switch is turned to the on
position and hold down the power on/off switch on the left handlebar. The
Wicked Thumb logo will show on screen and you are ready to go.
Hold the ‘SET’ button for 2
seconds to enter the
configuration
menu.
The passcode is 2112
.
Use ‘SET’ to save a value and
move to the next field, +/- to scroll
thru parameter values.
Ex:
+ 2X to select '2';
‘SET’ saves
‘
2
’ in field 1 and moves to field 2. +
to choose ‘1’, ‘SET’ to save and
move to field 3. + to choose ‘1’.
‘SET’ to save and move to field 4.
“
+
“ two times to choose
'2'
and
‘SET’ to save.
‘SET’ to “ENTER”
You should not have a need to enter the settings unless you want to
limit the speed of the bike, deactivate the throttle, change the mode
or check an error message.
General Settings
Option
1.1
(
Trip Clear
). ‘SET’ to
Y to reset tripmeter
.
1.2 (Brightness) 'SET' to select,
up and down to change level.
1.3 (Speed Limiter in KM) '99' is
unlocked. 34 will limit the bike to
20mph. Multiply each value
by .6 to determine the mph limit
(i.e 15mph is 25).
1.4 (Wheel Size) = 29 due to the
fat tires. Do Not Change This.
1.5 (Unit) You can toggle
between MPH and KPH
