WIA WELDMATIC 270C, Руководство оператора

Страница: 4 / 28

2
Operators Manual
Quality
•
Reliability
•
Performance
Safe Practices When Using
Welding Equipment
These notes are provided in the interests
of improving operator safety. They should
be considered only as a basic guide to Safe
Working Habits. A full list of Standards
pertaining to industry is available from
the Standards Association of Australia,
also various State Electricity Authorities,
Departments of Labour and Industry or
Mines Department and other Local Health
or Safety Inspection Authorities may have
additional requirements. Australian Standard
AS1674.2 provides a comprehensive guide to
safe practices in welding.
Eye Protection
NEVER LOOK AT AN ARC WITHOUT
PROTECTION.
Wear a helmet with
safety goggles or glasses with side shields
underneath, with appropriate filter lenses
protected by clear cover lens. This is a MUST
for welding, cutting, and chipping to protect
the eyes from radiant energy and flying
metal. Replace the cover lens when broken,
pitted, or spattered.
Recommended Shade Filter Lens
Amps
TIG MMAW MIG
Pulsed
MIG
0-100 10 9 10 12-13
100-150 11 10 10 12-13
150-200 12 10-11 11-12 12-13
200-300 13 11 12-13 12-13
300-400 14 12 13 14
400-500 — 13 14 14
500 + — — 14 14
Read first
The information contained in this
manual is set out to enable you to
properly maintain your new equipment
and ensure that you obtain maximum
operating efficiency.
Please ensure that this information is
kept in a safe place for ready reference
when required at any future time.
When ordering spare parts, please
quote the model and serial number of
the wirefeeder and part number of the
item required. All relevant numbers are
shown in lists contained in this manual.
Failure to supply this information
may result in unnecessary delays in
supplying the correct parts.
Safety
Before this equipment is put into
operation, please read the Safe
Practices section of this manual.
This will help to avoid possible
injury due to misuse or improper
welding applications.
Handle on Power Source
Please note that the handle fitted to
the Weldmatic 270C
power source
is intended for manoeuvring the
equipment by hand only.
DO NOT
use this handle for
suspending or mounting the power
source in any other manner.