WIA W67-1, Руководство оператора

Страница: 9 / 28

9 8
1 Digital Display Volts
The voltage display will show the voltage
adjustment for MIG modes. It will also
show the actual weld volts during welding.
The actual voltage will be retained for 10
seconds after the weld has finished. If the
optional voltage measurement clamp at the
wirefeeder is disconnected, the display will
indicate weld volts as measured at output
terminals. If the measurement clamp is
connected, the display will indicate weld
volts as measured at measurement clamp.
1
9
Fig 1 Controls on front face of wirefeeder
2 Digital Display AMPS/Wire Speed
For MIG modes the display will show the wire
speed setting. During welding, the display
will show actual weld amps and retain for 10
seconds after the weld has finished.
For STICK & TIG MIG modes the display
will show the AMPS setting. During welding,
the display will show actual weld amps and
retain for 10 seconds after the weld has
finished.
When the operator start the wire feeder
or adjust the wire speed value , the Digital
Display Wire speed will indicate the Wire
speed (2-22m/min).
When the operator adjust the ARC START
value, the Digital Display Wire speed will
indicate the arc start value (0 to 1).
When the operator adjusts the wirefeed
setting, the display will show the
adjusted values.
2
8
4
3
7
5
6
4 CONTROLS