Wi2Wi W2SW0025, Руководство пользователя

Страница: 3 / 20

Copyright © 2016 Wi2Wi, Inc.
Page 3 of 20
harmful interference in a residential installation. This equipment generates, uses, and radiates radio
frequency energy; and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and receiver.
c) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
d) Consult the dealer or an experienced radio/TV technician for help.
The FCC requires the user to be notified that any changes or modifications made to this device that are
not expressly approved by Wi2Wi may void the user‟s authority to operate the equipment.
Integrator Guidance:
 Only the antenna(s) described in the filings under this FCC ID or equivalent antenna(s) with
equal or lesser gain may be used with this transmitter. Any new antenna type, or higher gain
antenna would require a Class II permissive change.
 If the operation of the equipment is for portable use (within 20 cm of user), or where co-location
configuration use is required; the end product, including the transmitter will require re-evaluation
in accordance to the FCC rules.
Labeling:
The final end product must be labeled in a visible area with the following:
 "Contains FCC ID: XXXXXXXX, IC: YYYYYYYYY"
where XXXXXXXX, YYYYYYYYY are the approved FCC/IC ID for the device being installed.
The grantee's FCC/IC ID can be used only when all FCC/IC compliance requirements are met.