23
5.
CONFIGURATION
5.10 Services
This page can show up to 3 different configuration sections (first two are used by all the
profiles while the third is used only by part of them):
1) HTTP
Setup of the door through which the device can be reached via HTTP connection.
2) SSH
Setup of the door through which the device can be reached via SSH connection.
3) DHCP SERVER (profiles Mesh*, Mesh GW**, Mesh+AP, Mesh+AP GW, Router).
Configuration of the DHCP server.
The options that can be configured are the following:
- Enabling – this allows you to enable/disable DHCP service.
- Domain – this is the domain name inside which the DHCP server works.
- Authoritative – option to enable authoritative.
- Mask – netmask to be assigned to the clients.
- Start – Initial IP to be assigned from DHCP.
- Limit – maximum number of IP address that can be assigned by the DHCP.
- Lease – release time of the IP address due to inactivity of the client (it can be set at
15/30/60 minutes or without limit).
*for this profile it operates only through the Ethernet port.
**for this profile it is active only as a DNS server.
N.B.: for the profile Captive portal-client the parameters for DHCP are set up
directly in hot spot section