TECHNICAL DESCRIPTION
Whyte™ Series 17 Launch Amplifiers may be powered directly via the 18V
Auxiliary Input or line powered via the HH and HL trunk lines. A Whyte™
Power Supply Unit may be connected to the 18V Auxiliary Input which will
power the amplifier as well as pass power upwards and downwards via the
HH and HL lines.
All SAT trunk lines are DC passing in both directions. The SAT inputs provide
power to the LNB irrespective of whether the amplifier is powered via the
Auxiliary Input or line powered via the HH and HL inputs or outputs. An LED
is provided to indicate that power is present.
A switchable 12V supply is provided to power a mast amplifier via the
Terrestrial input if required. If a mast amplifier is not present this must be left
in the off position.
The Whyte™ Series17 range is compact due to the zigzag layout of the input
and output terminals. Therefore an F connector tool should be used to fit the
input and output cables.
Do not over tighten the F connectors (finger tight only).
5