Whyte Mudguard, Руководство по сборке

Страница: 10 / 15

WHYTE Mudguard Assembly Instructions
into the end of the stay bracket (2). Screw the sleeve (5) into the end
of the stay bracket (2) and lightly tighten. Repeat this process for the
other items (1, 2, 4 & 5) on
the other locations of the
mudguard (14). Do not firmly
tighten the sleeves (5) just
yet, as the side-stays (4) may
need to be adjusted later.
•
Remove the rear wheel from
the bicycle (refer to page 15
of the Whyte General Instruc-
tion Manual on how to do
this).
•
Reference figures H & J. For a
frame without a step in the
seat-stay bridge hole
(see
Terminology)
. Using an M6 x
30 long button head cap-
screw (16), a
small washer
with a Ø6 hole
(9), a large
washer with a
Ø6 hole (17)
and an M6 Ny-
lock hex nut
(10),
attach
the bridge
bracket (15)
to either the
front or rear
of the seat-
stay
bridge
(see Terminol-
ogy)
.
H
15
16
17
J
10
16
9
Tab