Page 11
NOTE:
If the appliance is unplugged, encounter power interruption, or turned off, you must wait 3 to 5
minutes before restarting the appliance. If attempted to restart before this time delay, the appliance
will not start.
When the appliance is used for the first time or restarted after having been shut off for a long time,
there could be a few degrees variance between the temperature you select and the one indicated on
the display. This is normal and it is due to the length of the inactivation time.
SETTING THE TEMPERATURE CONTROL
During normal operation, the temperature display on the control panel shows the temperature inside
the appliance.
The unit has two separate temperature zones. The temperature range of the UPPER zone is between
41ºF and 50ºF (5ºC and 10ºC) and the LOWER ZONE is between 50ºF and 72ºF (10ºC and 22ºC)
When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults.
The preset temperature for the UPPER temperature zone is 43ºF (6ºC) and for LOWER temperature
zone is 54ºF (12ºC).
You can press the left side UP and DOWN keys to control the internal temperature of the UPPER
temperature zone and press the right side UP and DOWN keys to control the internal temperature of
the LOWER temperature zone.
The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once and will
decrease 1ºC or 1ºF if you press the DOWN key once. The display flashes while you make the setting.
After the temperature has been set, the display will flash four times before it shows the current internal
temperature of the particular temperature zone.
To view the set temperature at any time, press the UP or DOWN key, the set temperature will
temporarily flash in the display for 5 seconds. Then the display shows the current internal temperature
again.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit can remember the previous
temperature settings. When the power has restored, the temperature display will show the current cabinet
temperature.
DOOR ALARM
If the door has been left open for more than 60 seconds, the alarm will sound. The alarm will stop by closing
the door.
TEMPERATURE ALARM
An alarm will sound if the temperature in one of the zones rises or falls outside the temperature range for more
than an hour. The zone’s relevant temperature display will flash at the same time.
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection. Pressing
the LIGHT key toggles between 2 modes of operation for the internal lights: Functional (default) mode and
Showcase mode. If you are in functional (default) mode, the lights will turn on only when the door is open. If
you are in Showcase mode, the lights will be on whether or not the door is open.
DYNAMIC CLIMATE / SILENT MODE
In the Dynamic Cooling mode, the interior fan cycles on and off to circulate the inside air evenly even the set
temperature is reached.
This will create a continuous climate inside the cabinet so you can store all your wine
