1614a; 1620a; 1626a & 1632a McKenzie Alder Hutch
Assembly Instructions
1614a_1620a_1626a_1632a_Finished — Page 5 — 07/17
Tools Required: Phillips Screwdriver, Pencil, Rubber mallet or Padded hammer.
1.
To move the adjustable shelves:
Determine where you want to place the Adjustable Shelves (C). Remove the #6 x 1/2" Undercut
Screws (G) from the underside of the shelf and take out the shelf and Shelf Brackets (Q). Insert
the Shelf Brackets (Q) flat side down into the four different holes and install the shelf. You may
secure them by inserting #6 x 1/2" Undercut Screws (G). See Figures 1 and 1a.
2.
NOTE: READ THE RAFIX ATTACHMENT SYSTEM INSTRUCTIONS NOW (See Page 10)
BEFORE YOU BEGIN THE FOLLOWING STEP
.
To move the Lower Shelf (D) or Lower Shelves (E and F), loosen the Rafix Cams (P) and
remove the Shelf/Shelves. Reposition the Rafix Bolts (O), replace the shelf and settle the Rafix
Cams over the Bolts. Tighten the Rafix Cams. See Figures 2, 2a and 2b.
Fig. 1
G
Q
Fig. 1a
C
C
C
C
Fig. 2
P
O
Fig. 2b
E
F
D
Fig. 2a
(1632)
(1614)
