Whittier Wood 745W Скачать руководство пользователя страница 1

INSTRUCTION SHEET FOR READY-TO-ASSEMBLE

Shown with:

743W Home Theater

Console

and two 

744W Media

Towers

(Sold Separately)

Congratulations on your choice of a Whittier Wood product.

This fine, hardwood furniture will be a handsome addition to your home. Just follow the step by step instructions.

SERVICE POLICY:

We will replace any parts which are defective, missing or damaged during assembly.

Please contact Whittier Wood Products customer service department

directly for replacement parts.

If you live in the U.S. or Canada, you can reach us 

Toll Free at: 800-653-3336.

All other customers can reach us by 

calling 541-687-0213

,

Faxing 541-687-2060 

or writing to P.O. Box 2827, Eugene, OR-USA 97402.

Customer service personnel can be reached Monday-Friday, 7:00 am. to 5:00 p.m. Pacific time.

A message can be left for customer service 24 hours a day, seven days a week.

When contacting us, please provide the furniture model number,

part letter, quantity needed, reason for replacement and your full name and address along

with a telephone number in case we need to contact you.

O

Read instructions completely before starting assembly.

O

Additional sanding with 220 grit is recommended for enhanced beauty.

O

Always sand with the grain of the wood. Be careful not to sand through the veneer.

O

Pre-finish all parts before final assembly; before finishing, read enclosed

Finishing Hints.

O

To seal the wood, apply a minimum of one coat of polyurethane, varnish, lacquer

or the equivalent to all sides. This will prevent moisture changes which could cause

future warpage or cupping.

O

Store the panels: 

1)

 in their box, 

2)

 in a dry place, 

3)

 in temperatures ranging from

40° to 90°. (Not on a cold, possibly damp, cement floor.)

IMPORTANT NOTES

INSPECT YOUR FURNITURE PERIODICALLY FOR ANY LOOSE GLUE JOINTS OR SCREWS, OR ANY OTHER PROBLEM WHICH

MAY BE AFFECTING THE STABILITY OF YOUR FURNITURE. TIGHTEN OR REPAIR AS NEEDED.

DESIGN SUBJECT TO CHANGE WITHOUT NOTICE.

3/04

DO NOT OVERLOAD

THIS UNIT.

For normal household

use only.

NOT

  recommended for

commercial use.

745W

Home

Theater

Bridge

Содержание 745W









Отзывы: