2322GACd 2322CAFd
McKenzie Queen Mantel Storage Bed for Adjustable Bed Bases
& 2325GACd 2325CAFd
McKenzie King Mantel Storage Bed for Adjustable Bed Bases
Assembly Instructions
This assembly requires two people.
2322GACd_2322CAFd_2325GACd_2325CAFd — Page 6 — 05/17
Tools Required
: Phillips screwdriver, 7/16" open end or box end wrench and Tape measure
Steps 1, 2 & 3 are for the McKenzie King Mantel Storage Bed for Adjustable Bed Bases (#2325)
1.
Remove the Center Deckboard (Rb) from the back of the Headboard (Aa) and place to the side.
See Figure 1.
2.
NOTE: READ CAM INSTRUCTIONS NOW BEFORE YOU BEGIN THE FOLLOWING STEP.
Insert Cam Housings (YK) into the two pre-drilled holes on the Headboard Assembly (Aa) as
shown in Figure 2. Lower Top Assembly (YH) so that the Cam Connectors (YJ) fit into the
housings (YK) tighten the cam housings as indicated in the Cam-lock System instructions. See
Figures 2 and 2a.
Fig. 2
Aa
YH
YK
x 2
YK
YK
Fig. 2a
YK
YJ
Fig. 1
Shipping Straps
Rb
Aa
