2319GACc; 2319CAFc McKenzie King Mantel Storage Bed
Assembly Instructions
This assembly requires two people.
2319GACc_2319CAFc — Page 12 — 02/17
11.
NOTE: There are blocks mounted on the back side of the Footboard to support the end of
the pedestal eliminating the need for an Assembled Foot in this position where it would
be easily visible. Do not attach an Assembled Foot in the position near the footboard.
Facing the Footboard, place an Assembled Foot (Ua) on the inside of the second set of Trestles
and attach with four Washers (H) and four 1/4" x 1-3/4" Hex Bolts (F). See Figures 11 and 11a.
Place your bed in its final position. Adjust all three Glides (W) found at the bottoms of the
Assembled Feet so that the Glides just touch the floor.
IMPORTANT: Make sure the Glides touch the floor and carry weight.
Fig. 11
F
H
x 4
x 4
Fig. 11a
Second set
of Trestles
H
H
Ua
F
F
W
