1505FST McKenzie Rectangular Mirror
Assembly Instructions
1505FST — Page 6 — 09/17
7.
Using the predrilled holes on the back of the Dresser as guides, attach the two Mirror Supports
(F) with four M4 x 41 Machine Screws (K). The upper screws will be inserted into the 3
rd
hole
from the top and the lower screws will be inserted into the 1
st
hole from the bottom of the Mirror
Supports. See Figures 7 and 7a.
8.
Peel off the backings on the Velvet Pads (M) and apply them to the bottom of the Mirror
Assembly (A). See Figure 8.
M
Fig. 8
M
K
x 4
K
1183 Dresser
(Back view)
F
K
Fig. 7
Third hole from the top
Fig. 7a
K
First hole from the bottom