2138AST 70"W Low Ellison Dresser
Assembly Instructions
2138AST
— Page 4 — 06/18
Tools Required: Phillips Screwdriver, Pencil.
1.
Remove screws from the plywood supports and side aprons. Recycle or discard. See Figure 1.
2.
This piece of furniture includes two drawer interlock systems, one controlling each vertical bank
of drawers; this allows only one lower drawer in each bank to be open at a time. This safety
feature reduces the risk of tip over. Do not defeat or remove the drawer interlock systems.
3.
Place the unit at its final destination. Rotate the Small Adjustable Glides (ZJ) found at the
corners of the unit and the Adjustable Glide with Hex Nut (R) at the bottom of the Assembled
Foot (J) until the unit is level. See Figure 3.
Fig. 3
ZJ
R
J
ZJ
Fig. 1
Plywood Supports
