Page 2 – 441W, 442W & 445W
TOOLS REQUIRED:
Phillips screwdriver, adjustable wrench.
BEFORE BEGINNING ASSEMBLY,
check that the quantities of the parts received match those on parts list below.
PART DESCRIPTION
QTY.
QTY.
441W/442W
445W
GG 1/4" x 2¼" Lag Screw . . . . . . . 4 . . . . . . 4
H 90° Bracket (2 hole) . . . . . . . . 0 . . . . . . 2
II Leg Brace . . . . . . . . . . . . . . . . 4 . . . . . . 4
J Washer . . . . . . . . . . . . . . . . . . 4 . . . . . . 4
K 90° Bracket (4 hole) . . . . . . . . 4 . . . . . . 4
PART DESCRIPTION
QTY.
QTY.
441W/442W
445W
A Long Apron . . . . . . . . . . . . . . . 2 . . . . . . 2
B Short Apron . . . . . . . . . . . . . . 2 . . . . . . 2
C Leg . . . . . . . . . . . . . . . . . . . . . 4 . . . . . . 4
D Shelf . . . . . . . . . . . . . . . . . . . . 1 . . . . . . 1
E Top
. . . . . . . . . . . . . . . . . . . . . 1 . . . . . . 1
F #6 x 1/2" Undercut
Type 17 Screw . . . . . . . . . . . 32 . . . . . 36
FIG. 1
FIG. 2
Groove is away
from table top.
Note: Braces and aprons
must be flush with the
bottom of the table.
1)
Lay the Top (E) upside down on a padded surface. Lay each Long Apron (A) in its approximate
location. Insert a Leg Brace (II) into the groove at each end of the long apron. Attach a Leg Brace
to each end of the Long Aprons (A) with a #6 x 1/2" Undercut Type 17 Screw (F). The long flat area
of the brace with two holes must be against the bottom of the Top (E). See FIGURE 1. Now lay the
Short Aprons (B) so that the Leg Braces fit into the grooves in the Short Aprons. Attach the Short
Aprons to the Leg Braces with #6 x 1/2" Undercut Type 17 Screws (F). See FIGURE 2.
IMPORTANT:
WE RECOMMEND FINISHING THE UNIT BEFORE ASSEMBLY.
Before finishing, read enclosed finishing hints.
ASSEMBLY INSTRUCTIONS
F
A
E
II
B
441W, 442W & 445W Side Tables
