Whitmore LUBRICURVE 50, Инструкция по установке и обслуживанию, Страница: 3 / 38

3
1
General
 Health & Safety legislation requires that LubriCurve rail lubricators are fitted by trained personnel
only; warranty will also be affected if un-trained teams work on the LubriCurve products. Whitmore
Rail can provide training courses.
A general instruction sheet is included with each LubriCurve pump supplied, this Manual provides
more complete information and should be used to support training provided by Whitmore Rail.

This Instruction Manual is intended to be generic and concentrates on LubriCurve systems to suit Flat
Bottom and Bull Head rail types, in particular 98,109, 110, 113lb, UIC60 flat bottom rails and 95lb bull
head rail applications.
 Only lubricator grease approved for use by Whitmore Rail can be used in the LubriCurve system. Use
of other greases will invalidate warranty.
2
Product Transport / Storage
 Goods are packed and delivered to requested address in a form that is suitable for the product given
good practice in the off-loading by the receiving company.
 LubriCurve 50 systems are delivered on the basis that they will be installed quickly.
 Systems are not intended for outside storage, equipment should be off loaded and stored inside a
secure watertight building until required for installation.
IMPORTANT:
Maintenance and repair of the lubricator and reservoir should only be carried out
by trained personnel. Compressed springs inside the lubricator may be dangerous
if handled incorrectly.