Whitmore LUBRICURVE 50, Инструкция по установке и обслуживанию, Страница: 24 / 38

24
10.11 Maintenance Log Sheet Example
Whitmore Rail Mechanical Lubricator Maintenance Log Sheet
Maintained By
Lub’ Manufacturer
Whitmore
Rail
Pump Model
Serial
Reservoir Model
1. Reservoir Capacity 37kg
9kg
2. Grease Integrity / Leakage
Yes / No Yes / No
Yes / No Yes / No
Yes / No Yes / No
Yes / No
4. GDU plate height. 1 2 3 4
Initial
Final
11. ADDITIONAL
WORK / GENERAL
Post Install site accepted by:
Customer
Name Date
Mileage
Maintainers Name Maintain Date Lubricator No.
Initial mm (80mm Full)
ELR
Road
Special Product Notes
GDU / Blade Model GDU / Blade Config 2 - 4
Rail Type
Up / Down
Final mm (280mm Empty)
LH Rail / Running-on RH Rail / Running-off
If above test failed, cleared airlock
2.1 Plunger Running-on
5.1 Airlocks Hammer test
2.6 Pump body outlet ports
2.4 Reservoir piston
2.5 Pump body inlet pipe
YES / NO
2.7 GDU’s
5. Grease Flow Test
PASS / FAIL PASS / FAIL
8.2 If yes, number of sleepers
YES / NO
YES / NO
7.3 Removed & cleaned plates
8.1 Over rail head YES / NO
YES / NO
PASS / FAIL
YES / NO
YES / NO
Continuous grease flow
8. Grease distribution through curve
6.4 Replaced pump body YES / NO
2.2 Plunger Running-off
2.3 Hoses
7. GDU
7.1 Visual check PASS / FAIL
7.2 Pumped through GDUs
7.4 Fitted new plates YES / NO
YES / NO
PASS / FAIL
YES / NO
9. Lubricator fastenings check YES / NO
If any part of section 10 has failed what
action, if necessary, was taken
8.3 Grease distribution ¼ - ½ - ¾ - Full Curve PASS / FAIL
8.4 Total Miles Covered Miles
YES / NO
YES / NO
PASS / FAIL
6.1 Replaced spring YES / NO YES / NO
6. Pump Operation Test
6.2 Replaced plungers YES / NO
Initial mm (50mm Full) Final mm (205mm Empty)
Any waste including packing and
empty grease tubs handed over to
Client for appropriate disposal
3. Initial plunger height. Initial Height Final Height
Enviromental/Waste Spares Required
PASS / FAIL
PASS / FAIL
6.3 Replaced non-return valve YES / NO