background image

1.  Shut down the engine or set the bypass timer.

2.  Use a 3/8" ratchet to remove the 1/2" NPT Pipe plug.

3.  Remove the battery from the DNFT and  disconnect from the polarized connector. 

4.  Connect the new battery to  the attached polarized plug.

5.  Reinsert the battery and reinstall 1/2" NPT Pipe plug.

6.  Verify the DNFT is working by pre-lubing the system and check  for LED blink.

ITEMS REQUIRED FOR REPLACING THE DNFT BATTERY:

 (1) P/N: 000505 BATTERY or RADIO SHACK P/N: 960-0418 (alternate replacement)
 (1) 3/8“ RATCHET WRENCH (for removal of battery plug)

For any further information or questions, please contact:

DNFT BATTERY REPLACEMENT INSTRUCTIONS

Directions for replacing the battery in the Digital No Flow Timer.

MAGNET

(H)

POLARIZED CONNECTOR

CONTROL HOUSING 

(B)

SPRING

SPACER

LED

#22 AWG 18" LEADS (7)
                   (I)

O-RING

(F)

1/2“ PIPE PLUG

FIELD REPLACEABLE

BATTERY

P/N: 000505

MAGNET

HOUSING

(C)

ALLEN HEAD

SET SCREWS(2)

(A)

RED
RED 
GREEN
ORANGE
ORANGE
YELLOW

507LIT LED-PS-WI-4

06.05.01

R

DIGITAL NO-FLOW TIMER

U.S. PAT. NO. 5,835,372

DNFT

ODESSA, TX USA

INSTRUMENT

INSTRUMENT

WHITLOCK 

WHITLOCK 

1-800-337-34121-800-337-3412

www

.noflo.com

www

.noflo.com

WHITLOCK INSTRUMENT

1300 N. Texas

Odessa, TX 79761

432.3373412 Fax 432.335.5926

1.800.337.3412       www.noflo.com

信德迈科技(北京)有限公司--http://www.cnmec.biz/
北京朝阳区胜古中路2号金基业大厦201室 邮编:100029 
Tel: 010-8428 2585,8428 2935, 8428 9077
       010-8428 3983,6441 3876,139 109 62635
Fax: 010-8428 8762

Содержание DNFT-LED-PS

Страница 1: ...ocessor and transistor components for detecting Slow Flow and No Flow of divider block lubrication systems The DNFT incorporates an oscillating crystal to accurately monitor the cycle time of the lubrication system to enable precision timed shutdown capability The magnet assembly and control housing mount directly to the divider valve to become an integral part of the lubrication system The DNFT o...

Страница 2: ...O ring or metal gasket F is in place on magnet housing C Screw magnet housing C into end of divider valve E Torque to 15 foot pounds max 4 Slide DNFT B all the way onto hex of magnet housing C Tighten set screws on hex of magnet housing Torque 25 inch pounds max 5 The LED on the DNFT indicates each divider valve cycle This enables operator to adjust the lubricator pump for correct cycle time and o...

Страница 3: ...ure plugs Tighten all divider valve plugs Adjust DNFT To insure proper operation of the divider block lubrication system it is absolutely necessary that all tubing and components be filled with oil and free of air before start up Check system pressure to insure oil is flowing to divider valves If necessary install pressure gauge to monitor operation of lubrication system Check gauge to insure pump...

Страница 4: ...tact DNFT BATTERY REPLACEMENT INSTRUCTIONS Directions for replacing the battery in the Digital No Flow Timer MAGNET H POLARIZED CONNECTOR CONTROL HOUSING B SPRING SPACER LED 22 AWG 18 LEADS 7 I O RING F 1 2 PIPE PLUG FIELD REPLACEABLE BATTERY P N 000505 MAGNET HOUSING C ALLEN HEAD SET SCREWS 2 A RED RED GREEN ORANGE ORANGE YELLOW 507LIT LED PS WI 4 06 05 01 R DIGITAL NO FLOW TIMER U S PAT NO 5 835...

Отзывы: