4
the floor. If the instrument fit feels uncomfortable, readjust
clevis/lower rod length with spring clip button and cam-lock
so that search coil can be held near the floor without stooping
over.
6.
Remove the protective paper from the two black arm cup
foam pads. Carefully align pads on the inside of the elbow
cup, one on each side of the center rod, and press firmly into
place.
7.
Adjust the elbow cup strap so that it is loose enough for you to
slide your arm in and out without loosening each time you
want to set the detector down. The elbow cup strap provides
extra leverage and control. However, some prefer not to use
it.
8.
Install the battery pack; see the next section for information
on batteries and charging.
