3
Cam lock
Clevis
Rubber washers (2), fiber bolt
Search coil
Lower rod
Arm cup
Battery door
1.
Remove all parts from the shipping carton and check assembly
diagram to ensure all parts are present.
2.
Install black rubber washers on fiber clevis/lower rod, insert
clevis lower rod onto loop ears. Use only nonmetallic wash-
ers, fiber bolt, and fiber thumb nut to secure loop/search coil
to clevis/lower fiber rod.
3.
Unlock middle rod cam-lock and insert clevis/lower rod into
middle rod so that stainless steel spring clip buttons line up
and lock into one of the adjustment holes in the rod. Turn
cam-lock to secure. The second or third adjustment holes are
suitable for average sized adults.
4.
Wind the loop cable around the rod assembly, first revolution
over the top of the rod, all the way to the top of the middle
rod, about five revolutions. Use the black cable retainers, one
near the loop, and one near the top of the middle rod, to hold
the loop cable in place. Make sure the cable is wrapped all
the way to the front of the control box.
5.
Grip the instrument by the handle, with your arm in the
elbow cup with strap and sweep the loop/search coil over
Assembly
