background image

 

6

 

 

Unit won’t turn on, turns on but 
turns off quickly, performs 
erratically. 

Replace the battery. Check that battery is 
inserted correctly, with proper polarity 
(positive to positive, negative to 
negative).  

Unit sounds a false alert as it 
approaches the ground. 

Place the tip to the ground but away from 
metal and quick-press the button to 
“grab” the ground reading.  

Unit turns on and produces a 
three-tone beep before the two-
tone “ready” signal. 

Unit is probably overloaded. Make sure it 
is held away from ground and metal 
during turn-on.  

Target appears to be large and 
difficult to pinpoint. 

Quick-press the button to ratchet down 
the sensitivity. This reduces the apparent 
size of strong targets.  

Target is detected but then 
disappears as the probe is moved 
deeper into the hole 

Target is probably in the sidewall of the 
hole.  

Troubleshooting 

Specifications 

Operating mode

VLF-IB 

Frequency

12 kHz 

Temperature range

5° to 158°F (-15° to +70°C) 

Search modes

All Metal non-motion 

Ground balance

LockTrac with Grab 

Target indication

Beeper, vibrate (selectable) 

Target response

Proportional 

Search coil

0.3” / 7.6mm coaxial 

Housing

Weatherproof 

Weight

6.5 oz / 185g (with 2 AA batteries) 

Length

10 inches / 25cm 

Batteries

(2) AA or (1) 9V, alkaline or better 

Battery life

20 hours typical 

Warranty

2 years, transferable 

Содержание BULLSEYE TRX









Отзывы: