background image

8  Vision Assembly Guide 

 

NiMH Rechargeable Battery

 

 

•  A rechargeable NiMH (Nickel Metal Hydride) battery (Orange Decal) 

is provided with your Vision. This battery can be recharged hundreds of times.  
Full charge can be achieved anytime during the discharge cycle (a non-memory 
system). The provided “Smart Charger” and “Charging Cradle/Stand” sense 
the type of charge the battery needs and automatically adjust the charge cycle.  
From fully low this system provides a full charge in as little as 3-4 hours. A full 
charge will last ten to twelve hours of normal use. Battery life will vary with 
temperature, the number of targets found, and the exact settings used. Six hours 
is not unusual for extreme high performance settings, or for batteries that have 
experienced extensive use.
 

•  The battery will lose its charge during storage.  If stored inserted in 

your instrument, this loss will be more significant. It is recommended that the 
battery be removed from the Vision during periods of storage. It is not advisable 
to store rechargeable batteries for long periods of time without use (six + 
months). If extended storage is necessary, store with a charge (charged).  If 
possible, recharge at least once every six months of non-use.
 

•  Do not discharge the battery in devices other than your metal 

detector. Unnecessary discharging and/or an absolute discharge will reduce 
battery life and may damage the battery. Unlike older rechargeable battery 
designs, the rechargeable battery provided with your Vision can be recharged at 
any time. Regardless of whether or not it already has a partial charge, memory 
will not occur.
 

•  White’s has provided the leading edge NiMH rechargeable battery 

technology with your Vision. Disregard advice that conflicts with the above 
recommendations. Care for batteries provided by other manufacturers, or with 
other White’s models, may vary.
 

•  Do not combine (use) any other battery, or any other battery charger, 

not specifically designed to work with this system.
 

•  The NiMH battery provided with your Vision may be subject to 

recycling laws in your area.  It is the right thing to do and is often legally required.  
If, perhaps many years in the future, you are uncertain as to where to return a 

Содержание Vision

















Отзывы: