background image

Chapter 4 GM24k Controls  

Disc Setting 
(2 bars)  

Iron Cancel (tap) 

Disc. Adjust (hold)  

Iron Cancel (Discrimination) 

When detecting for gold nuggets it is often best 
to  “dig it all.” Gold can have various shapes, 
sizes, be  embedded in iron rock, so it’s impos-
sible to account  for every nugget in the ground 
and only dig gold.  However, in challenging 
conditions the electronic  prospector may need 
to adjust the GM24k to cancel  out unwanted 
targets or heavy ground  mineralization. This is 
done at the expense of some  sensitivity, but in 
extreme conditions the amount of  signals can 
overwhelm your senses, causing “ear  fatigue.” 

In these cases the real battle is in finding  good 

targets, not raw depth. 

Situations where you might need to use Iron  
Discrimination are: rapidly changing ground  
minerals, high concentrations of hot or cold 
rocks,  old mining camps with iron trash, highly 
variable  ferrous ground conditions.  

Iron Cancel Adjustment  

To enable Iron Cancel in either Beep or Zip mode, tap the Nail Icon. This will engage the Iron Cancel  
feature at the default setting. You can adjust this setting up or down by holding the Nail Icon, then using 
the Up and Down buttons to set the discrimination range. Best practice is to only use what is required for 
smooth operation of the GM24k, as too high of an  Iron Cancel setting will decrease the detector’s sensi-
tivity to small gold nuggets. Again, this is a trade off - it is up to the operator to pick the balance between 
a smooth threshold and maximum sensitivity. If you are getting a lot of high signals from hot rocks, tap 
the LOCK button while in the Iron Cancel adjustment mode. This will block out a range of signals from 
94-99.

Please note that unlike coin detectors, the threshold will not go silent over discriminated targets in the 

“Zip” (all-metal) audio mode. This is to ensure smooth operation and combat ear fatigue. You may find 

that it is best to detect with Iron  Cancel off, and then toggle it on to check a target. Very small gold will 
often report a very weak target ID number, or none at all, so this setting is best used as a last resort in 
only the most challenging conditions.  

13  

Содержание GM24k

































Отзывы: