Whites MXSPORT, Руководство пользователя

Страница: 5 / 32

4
1. Remove all parts from the shipping carton and check assembly diagram to ensure
all parts are present.
2. Install black rubber washers on fiber lower rod; attach search coil to lower fiber
rod. Use only the nonmetallic washers, fiber bolt, and fiber thumbnut provided to
secure search coil loop to the lower fiber rod.
3. Insert lower fiber rod into center rod so that the spring buttons line up with one of
the length-adjustment holes in the center rod. Turn the camlock to eliminate any
slack.
4. Insert the center extension rod into the hand-grip section. Turn the camlock to
eliminate any slack.
5. Wind the search coil cable around the rods, first revolution over the top of the
rod, all the way to the display pod. Plug the cable into the connector on the back
of the display. When looking at the back of the display, it is the connector on the
right. Tighten the retainer ring securely.
6. Thread the velcro armcup through the slots on the armcup. With your arm in
position, fold the strap over onto the velcro so that the strap is loose enough to to
pull your arm in and out of the armcup.
Assembly
Search Coil
Non-metallic
Washers
Fiber Bolt &
Thumbnut
Fiber Rod
Camlock
Center Rod
Search Coil
Cable