Whites MXSPORT, Руководство пользователя

Страница: 23 / 32

should be as quiet as possible while still hearing a hum.
3. Press Options to exit, or wait 10–15 seconds for the Options
mode to automatically time out.
Tone Identification or Tone ID
The pitch or audio frequency produced by each target’s display
identification range can be highlighted with differently pitched
sounds, called Tone Identification or Tone ID.
A specific audio pitch reference for each range provides quick au-
dio ID based on the pitch of the beep it produces during search-
ing- without looking at the display.
When Tone Identification is in single tone, all accepted metal
types produce the same audio pitch during searching. If the
Discrimination is set to reject a specific target range, that range
may not produce a beep of any pitch. Rejected targets often do
not produce any tone (silence).
To Adjust Tone Identification:
1. Press Options and use up & down arrows to select Tone ID.
2. Press
+ & - to select the type of Tone Identification desired.
3. Press Options to exit or wait 10–15 seconds for the options
mode to automatically time out.
Tone ID Settings
1-Tone: All targets produce the same pitch beep (no tone ID).
2-Tone ID: Iron targets produce a low-pitched beep; all other
targets produce a higher pitched beep.
4-Tone ID:
• Iron (lowest)
• Foil & Pull Tabs
• Nickels
• Coins (highest pitch)
8-Tone ID:
• Large Iron (lowest)
• Small Iron
• Foil/ Small Gold
• Nickels
22