Whites MATRIX 100, Инструкция по эксплуатации

Страница: 9 / 24

9
Sensitivity control
The unit is preset, at the factory, to medium sensitivity. You can change
sensitivity to the low, medium or high level.* The Specifications list (page
20) shows the effect of the different sensitivity levels for detecting objects
of various sizes. Open the battery door and remove the stylus from inside
the battery door (see page 7). Use the stylus to press the sensitivity control
to cycle through the sensitivity levels, medium, high, low, etc. The unit will
beep or vibrate and will flash the red visual indicator to announce the new
sensitivity level:
One beep/vibration/flash = low sensitivity
Two beeps/vibrations/flashes = medium sensitivity
Three beeps/vibrations/flashes = high sensitivity
When the unit is turned off or the battery is removed, the sensitivity level
setting is retained in the memory.
Earbud volume
Stylus
Sensitivity
Visual indicator LED
De-Sense button
* To be determined by administration policy and supervisor control.