5
HOW TO ASSEMBLE
CAUTION: Assemble the cleaner before using.
CAUTION: Moving parts. Make sure on/off switch is in off (0) position before plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Attach Handle
CAUTION: Do not catch cord under handle.
1.
From rear of cleaner, align handle with grooves and
slide onto cleaner. If necessary, use thumb and finger
pressure to slide handle into position.
2.
Attach handle with three 1 inch screws in the assembly
packet. Use either a flat or Phillips® head screwdriver.
Handle
Grooves
3 Locations
for Screws
Step B Store Hose and Accessories
3.
To store hose. Remove paper holding hose to unit.
Lay hose over hose retainer and place nozzle on
nozzle retainer.
4.
Store tools, crevice tool, dusting brush and upholstery
nozzle where indicated above.
Hose
Retainer
Nozzle
Retainer
Nozzle
Crevice
Tool
Upholstery
Nozzle
Dusting
Brush
1
2
3
