White-Westinghouse XHE, Руководство пользователя

Страница: 6 / 18

6
4
Wash Action Time Knob
This knob allows you to change the duration of agitation time based on the soil level of each
load.
HIGH gives your cycle the agitation time of a long duration plus the added benefi t of a
mid agitation soak.
5
Water Level
Turn the water level knob to select a water level appropriate for the load size. For best
results, DO NOT overload. Add items loosely to the tub. The dry load should not be higher
than the top row of holes in the wash tub. There should be enough water in the tub for items
to move freely.
Note : If AUTO water level is selected, the washer will perform a dry load sensing procedure
before adding water to the tub. The sensing indicator light will be lit.
6
Chime A signal will sound at the end of the washing cycle if this option is selected.
7
Fabric Softener
You must turn the fabric softener switch to the “on” position for correct operation. See Care
and Cleaning for dispenser cleaning procedures.
8
Indicator Lights
The following pilot lights indicate which drying phase the appliance is carrying out:
• Sensing
• Add a Garment
• Wash
• Final Spin
• Done
9
Estimated Time Remain-
ing Display
The display shows the following information:
• The duration of the selected programme : After selecting a programme the duration of the
selected programme appears on the display. During the programme, the time remaining is
updated every minute.
• Message «PAUSE» : It is scrolled across the display when the cycle is paused.
Control Panel, continued