White-Westinghouse WWSS2614SP0 Скачать руководство пользователя страница 12

12

TEMPERATURE ADJUSTMENT

To adjust the temperature to a higher or lower setting, press the Up (Cold) or Down (Colder) 

button closest to the display. The first time you press the button, the display shows current 

setting you entered. Each press of the button after that changes the setting by one.
The display shows your new setting momentarily, then changes back to the current temperature. 

Numeric Display

Freezer

Fresh Food

Warmest

1

1

Factory Setting

6

6

Coldest

9

9

Temperature Adjustment

If Fresh Food compartment is too 

warm

Adjust Fresh Food control one 

degree colder by pressing Down 

(Colder) button.

If Fresh Food compartment is 

too cold

Adjust Fresh Food control one 

degree warmer by pressing the Up 

(Cold) button.

If Freezer compartment is too 

warm

Adjust Freezer control one degree 

colder by pressing Down (Colder) 

button.

If Freezer compartment is too 

cold

Adjust Freezer control one degree 

warmer by pressing the Up (Cold) 

button.

CONTROLS

Turning the Cooling system on and off

You can disable the cooling system in your refrigerator by pressing the On/Off button located on 

the left side of the temperature control panel. To ensure that you do not accidentally turn off the 

cooling system, the button does not work unless you press and hold it for three seconds. Once 

you disable the cooling system, all refrigeration to the freezer and fresh food compartments 

stops. To turn the cooling system back on, you must again press and hold the On/Off button for 

three more seconds.

NOTE

Pressing the On/Off button on the control panel disables your refrigerator’s cooling system 

but does not disconnect power to lights and other electrical components. To turn off power to 

your refrigerator you must unplug the power cord from the wall outlet.
Each time you make settings on the control panel, a single audible tone acknowledges your 

input.

IF TEMPERATURE DISPLAYS FLASH...

If ever you see both temperature displays continuously flashing, it may indicate that the control 

system has detected a performance problem. Call your service representative, who can interpret 

the flashing message.

To maintain temperatures, a fan circulates air in the refrigerator and freezer compartments. For 

good circulation, do not block cold air vents with food items.

Содержание WWSS2614SP0

























Отзывы: