![White-Westinghouse WRD135UBGW Скачать руководство пользователя страница 17](http://html1.mh-extra.com/html/white-westinghouse/wrd135ubgw/wrd135ubgw_instruction-manual_976966017.webp)
Installation
Installation
31
32
Choosing the location
Place the refrigerator close to a
grounded outlet. Do not use any
adaptor or extension.
Install the refrigerator in a well-
ventilated area, away from direct
sunlight and from heat sources, such
as ovens and burners, from
inflammable materials, and from
areas where water is frequently used,
such as sinks.
For a better performance, install the
refrigerator in a room with
temperature between 10ºF to 110ºF.
The freezer was designed to keep it
intern temperature between this
range.
In order to ensure that heat dissipates
rapidly and that the refrigerator
operates efficiently, with low energy
consumption, we recommend leaving
the following minimum distances
between the refrigerator and the walls
and ceiling:
Top: 30cm
Sides: 7,5cm
Back: 10cm
Check to be sure that there is enough
space in front of the refrigerator to
open the door (160°).
The exterior walls can warm up due to
the compressor and transfer the
temperature inside. So you can feel
temperature 30ºF higher than the
room temperature. For this reason it is
important keep enough space
around the refrigerator to allow air
circulation.
to
Do not install the refrigerator outdoors.
Leveling the refrigerator
Install the refrigerator on a completely
level and solid surface. The door must
be closed when leveling the
refrigerator
Use a level with glass-enclosed bubble
to verify whether the refrigerator is
properly leveled, with the four feet
firmly on the floor.
If the refrigerator needs to be adjusted,
carefully lean it and turn the front
adjustable leveling feet until it is firmly
installed.
Proper leveling prevents movement,
vibration and other problems.
Do not substitute the original
refrigerator feet.
Wait at least 2 hours before plugging
the refrigerator in this will prevent
operating problems.
To Level Your Refrigerator:
After discarding crating screws and
wood base, use a carpenter’s level to
level the refrigerator from front-to-
back. Adjust the plastic leveling feet in
front, ½ bubble higher, so that the
door closes easily when left halfway
open.
Electrical installation
Before turning on the refrigerator,
check to see if the voltage of the outlet
to be used is the same as that
indicated on the tag located close to
the plug (along the power cord) or on
the refrigerator's identification label.
Installation
E
N
G
E
N
G
30cm
(top
)
10cm
(back
)
7,5cm
(side)
7,5cm
(side)